Bobst Autoplaten SP 102-BMA

Details

  • MachineLinker ID ML-36005
  • Seller reference A4P02111
  • Manufacturer Bobst
  • Model Autoplaten SP 102-BMA
  • Machine type Hot foil stamping machine
  • Year of manufacture 1987
  • Condition Good (used)

Technical data

  • Thickness21.5 mm
  • Minimum paper range80 - 90 g/sqm
  • Maximum cardboard range2000 g/sqm
  • Maximum corrugated board thickness4 mm
  • Maximum sheet format1020 x 720 mm
  • Minimum sheet format400 x 350 mm
  • Maximum stamping and embossing format1010 x 680 mm
  • Maximum die-cutting format1040 x 725 mm
  • Maximum with gripper1020 x 705 mm
  • Maximum without gripper margin1020 x 720 mm
  • Feeder/delivery maximum format1200 x 800 mm
  • Maximum pressure250 tons
  • Maximum productivity stamping5000 sheets/hour
  • Maximum productivity die-cutting7500 sheets/hour
  • Maximum height feeder(normal mode)1820 mm
  • Maximum height feeder(with pile preparation device)1710 mm
  • Maximum height Feeder(non-stop)1660 mm
  • Maximum height delivery1460 mm
  • Gripper margin9 - 17 mm
  • Height of embossing dies6,35 / 7 mm
  • Height of cutting rules23,8 mm
  • Adjustable temperature50 - 160 °C
  • Maximum reel diameter250 mm
  • Foil web width25- 1010 mm
  • Maximum programmable advance720 mm

Description

Overhauled 2009

Automatic press for hot foil stamping and paper and carton converting

FEEDER

Universal non-stop feeder

In line pile preparation

Suction unit with multiple adjustments

FEED TABLE

4 Front lays, adjustable in pairs with front register control

Pull guide (OS) Transport belts

PLATEN

Heated upper head with 16 independent heating zones

Steel stamping supporting plate

Thickness: 21.5 mm

2 x Honeycomb chase (E-6) for 6,35 or 7 mm dies

2 x Stamping plate, BM (E-62)

Thickness: 2,3 mm

Compensating plate, BM (E-52)

Thickness: 3,0 mm

Lateral guiding device for foil

Motorized foil tension shaft control with air cooling

Automatic "on and off' pressure device of the platen

Blower for stabilizing the sheet before stamping or converting

Blower for releasing the foil after stamping

Device for manual introduction of foil

Lateral foil removal system, combined with rotating brushes, with speed modulation in function with foil advance

Device for lengthwise slitting of foil

Foil break control system for 16 foils

Removable foil supply module comprising

3 x individual motor-driven advance regulating shafts

2 x telescopic sliding rails for reel-holders

2 x reel-holder axles

2 x additional reel-holder used for off-machine preparation

3 x sets of 8 reel-holder levers with combinable I" and 3" hubs, including:

1 set for narrow reels, 1 set for mid-sized reels, 1 set for large reels

15 narrow drive rollers, width 14 mm

15 wide drive rollers, width 38 mm

1 movable stand (OOS) for the installation or removal of the BMA device.

DELIVERY

Pile tray

Adjustable rear and side jogger. Manual non-stop rack

Options added:

Die cutting chase E-1

Compensating plate E-3

Micrometric adjusting plate E-55

Set of thin cutting plates E-98 Compatible with SP 102 Evoline

Technical data

CONVERTIBLE STOCK

Minimum paper range: 80 – 90 g/sqm

Maximum cardboard range: 2000 g/sqm

Maximum corrugated board thickness: 4 mm

SIZES

Maximum sheet format: 1020 x 720 mm

Minimum sheet format: 400 x 350 mm

Maximum stamping and embossing format: 1010 x 680 mm

Maximum die-cutting format: 1040 x 725 mm

DIE-CUTTING FORMAT

Maximum with gripper: 1020 x 705 mm

Maximum without gripper margin: 1020 x 720 mm

DIMENSION OF PALLETS

Feeder/delivery maximum format: 1200 x 800 mm

PRODUCTION

Maximum pressure: 250 tons

Maximum productivity stamping: 5000 sheets/hour

Maximum productivity die-cutting:  7500 sheets/hour

PILE HEIGHT

Maximum height feeder(normal mode): 1820 mm

Maximum height feeder(with pile preparation device): 1710 mm

Maximum height Feeder(non-stop): 1660 mm

Maximum height Feeder(with pile preparation device non-stop): 1550 mm

Maximum height Delivery: 1460 mm

Gripper margin: 9 – 17 mm

Height of embossing dies: 6,35 / 7 mm

Height of cutting rules: 23,8 mm

PLATEN TEMPERATURE

Adjustable temperature: 50 – 160 °C

16 x adjustable temperature zones

FOIL SUPPLY MODULE

Maximum reel diameter: 250 mm

Foil web width: 25- 1010 mm

3 x advance shafts

Maximum programmable advance: 720 mm

Machine location

Open on Google Maps
  • Address: Șoseaua Nicolina 43
  • City: Iasi
  • Country: Romania

Contact seller

View machines

Please mention MachineLinker when you call or write to the seller.

The information in this listing is provided by the seller, who is solely responsible for it. MachineLinker does not verify listings and is not responsible for their accuracy, or for the condition, price or availability of the machine. MachineLinker is not a party to any sale: please check all details with the seller before buying.