Details
-
MachineLinker ID ML-36310
-
Seller reference A4P02315
-
Manufacturer Heidelberg
-
Model Speedmaster SM 52-2-P
-
Machine type Sheet-fed offset printing machine
-
Year of manufacture 1998
-
Condition Good (used)
-
Category Offset printing machines
Technical data
- Maximum sheet format370 x 520 mm
- Minimum sheet format(perfecting)140 x 145 mm
- Minimum sheet format(straight)105 x 145 mm
- Maximum print area(straight)360 x 520 mm
- Maximum print area(perfecting)350 x 520 mm
- Paper thickness0.03 - 0.4 mm
- Maximum speed15.000 sheets/hour
Description
2 colors
Perfecting unit for 1/1 or 2/0
Heidelberg CP Tronic control system
Graphics Alphatronic 200 powder spray unit
Technotrans Alpha.d 10L dampening solution unit
42 million impressions
Maximum sheet format: 370 x 520 mm
Minimum sheet format(perfecting): 140 x 145 mm
Minimum sheet format(straight): 105 x 145 mm
Maximum print area(straight): 360 x 520 mm
Maximum print area(perfecting): 350 x 520 mm
Paper thickness: 0.03 – 0.4 mm
Maximum speed: 15.000 sheets/hour
Known issues:
There is an intermittent issue with the perfecting changeover as described above. The exact cause is unknown. Technicians have previously changed the machine back to 2/0, and it takes approximately 20 minutes.
The machine does not have its own pneumatic compressor. In our production facility, it has been supplied with compressed air from our central compressed-air system.
The Technotrans Alpha.d 10L slowly loses refrigerant over time. Once the refrigerant level is too low, it can no longer provide sufficient cooling. The unit therefore needs to be checked and repaired accordingly.
The sheet decurler is no longer operational. The sheet brake itself is unaffected and operational; it has its own separate blower.
On some of the side covers, the original fastening screws no longer hold properly. These covers are therefore currently secured with adhesive tape.
Machine location
Open on Google Maps-
Address: Șoseaua Nicolina 43
-
City: Iasi
-
Country: Romania
