Details
-
MachineLinker ID ML-36105
-
Seller reference A4P-E-219
-
Manufacturer Smag
-
Model Galaxie
-
Machine type Label finishing machine
-
Year of manufacture 2015
-
Condition Good (used)
-
Category Label systems
Technical data
- Semi-rotary die cutting section(this station can also work on registered full rotary mode)
- Cross adjustment+/- 5 mm
- Thickness of the magnetic die cutting plate0,44 mm
- Maximum speed on semi-rotary modeup to 50 m/min according to the die cutting plate length
- Maximum speed on registered full rotary mode150 m/minute
Description
Laser head broken, laser head integrator Spartanics (optics Cambridge Technology; laser type Coherent)
Waste suction system to remove parts of kiss cut labels
– Complete frame to receive this option
– Device to remove the labels
– Industrial vacuum section
Independent semi-rotary die cutting station
– Complete frame
– Die cutting station servo motorised with a 20 inches magnetic cylinder
– Registration sensor
– Mechanical pressure bridge with gauge system type KMS 3 or similar
– Waste matrix rewind (pneumatical mandrel 76 mm) and pressure arm
– Servo compensation trolley
– Touch screen control panel
Gap Master option
– Gap Master system from Kocher and Beck for the gap adjustment in the semi-rotary die station (included a KMS set of pressure adjustment gauges).
Buffer unit for inline press connection
This section has been developed to synchronise the speed and automatism of a Digital press or
conventional press (type TR2) and the SMAG converting solution (type Digital Galaxie generation III, E- Cut). This section offers the advantage to accumulate 12 meters of substrate between two machines, to synchronise the stop/start and any speed variations.
Converting section
– Two nip rollers located before and after the slitting module
– Slitting module with 4 shear knives
– Two rewind shafts equipped with two pneumatical mandrels diam 76 mm
– Programmable reel length or label count as required
– Touch screen operator interface for the programming and presetting system
Turret rewinding Option
Semi-automatic turret rewinder instead of two fixed mandrels as in the standard machine.
TECHNICAL SPECIFICATIONS:
Semi-rotary die cutting section: (this station can also work on registered full rotary mode)
Cross adjustment: +/- 5 mm
Die cutting magnetic cylinder repeat delivered with press: 20 inches
Minimum die cut repeat in semi-rotary mode (with 20" cylinder): 100 mm
Maximum die cut repeat in semi-rotary mode (with 20" cylinder): 450 mm
Thickness of the magnetic die cutting plate: 0,44 mm
Registration in semi-rotary mode according to the printing spot: +/- 0,15 mm
Maximum speed on semi-rotary mode: up to 50 m/min according to the die cutting plate length
Maximum speed on registered full rotary mode: 150 m/minute
Machine location
Open on Google Maps-
Address: Șoseaua Nicolina 43
-
City: Iasi
-
Country: Romania