Details
-
MachineLinker ID ML-36005
-
Seller reference A4P02111
-
Manufacturer Bobst
-
Model Autoplaten SP 102-BMA
-
Machine type Hot foil stamping machine
-
Year of manufacture 1987
-
Condition Good (used)
-
Category Post-press machines
Technical data
- Thickness21.5 mm
- Minimum paper range80 - 90 g/sqm
- Maximum cardboard range2000 g/sqm
- Maximum corrugated board thickness4 mm
- Maximum sheet format1020 x 720 mm
- Minimum sheet format400 x 350 mm
- Maximum stamping and embossing format1010 x 680 mm
- Maximum die-cutting format1040 x 725 mm
- Maximum with gripper1020 x 705 mm
- Maximum without gripper margin1020 x 720 mm
- Feeder/delivery maximum format1200 x 800 mm
- Maximum pressure250 tons
- Maximum productivity stamping5000 sheets/hour
- Maximum productivity die-cutting7500 sheets/hour
- Maximum height feeder(normal mode)1820 mm
- Maximum height feeder(with pile preparation device)1710 mm
- Maximum height Feeder(non-stop)1660 mm
- Maximum height delivery1460 mm
- Gripper margin9 - 17 mm
- Height of embossing dies6,35 / 7 mm
- Height of cutting rules23,8 mm
- Adjustable temperature50 - 160 °C
- Maximum reel diameter250 mm
- Foil web width25- 1010 mm
- Maximum programmable advance720 mm
Description
Overhauled 2009
Automatic press for hot foil stamping and paper and carton converting
FEEDER
Universal non-stop feeder
In line pile preparation
Suction unit with multiple adjustments
FEED TABLE
4 Front lays, adjustable in pairs with front register control
Pull guide (OS) Transport belts
PLATEN
Heated upper head with 16 independent heating zones
Steel stamping supporting plate
Thickness: 21.5 mm
2 x Honeycomb chase (E-6) for 6,35 or 7 mm dies
2 x Stamping plate, BM (E-62)
Thickness: 2,3 mm
Compensating plate, BM (E-52)
Thickness: 3,0 mm
Lateral guiding device for foil
Motorized foil tension shaft control with air cooling
Automatic "on and off' pressure device of the platen
Blower for stabilizing the sheet before stamping or converting
Blower for releasing the foil after stamping
Device for manual introduction of foil
Lateral foil removal system, combined with rotating brushes, with speed modulation in function with foil advance
Device for lengthwise slitting of foil
Foil break control system for 16 foils
Removable foil supply module comprising
3 x individual motor-driven advance regulating shafts
2 x telescopic sliding rails for reel-holders
2 x reel-holder axles
2 x additional reel-holder used for off-machine preparation
3 x sets of 8 reel-holder levers with combinable I" and 3" hubs, including:
1 set for narrow reels, 1 set for mid-sized reels, 1 set for large reels
15 narrow drive rollers, width 14 mm
15 wide drive rollers, width 38 mm
1 movable stand (OOS) for the installation or removal of the BMA device.
DELIVERY
Pile tray
Adjustable rear and side jogger. Manual non-stop rack
Options added:
Die cutting chase E-1
Compensating plate E-3
Micrometric adjusting plate E-55
Set of thin cutting plates E-98 Compatible with SP 102 Evoline
Technical data
CONVERTIBLE STOCK
Minimum paper range: 80 – 90 g/sqm
Maximum cardboard range: 2000 g/sqm
Maximum corrugated board thickness: 4 mm
SIZES
Maximum sheet format: 1020 x 720 mm
Minimum sheet format: 400 x 350 mm
Maximum stamping and embossing format: 1010 x 680 mm
Maximum die-cutting format: 1040 x 725 mm
DIE-CUTTING FORMAT
Maximum with gripper: 1020 x 705 mm
Maximum without gripper margin: 1020 x 720 mm
DIMENSION OF PALLETS
Feeder/delivery maximum format: 1200 x 800 mm
PRODUCTION
Maximum pressure: 250 tons
Maximum productivity stamping: 5000 sheets/hour
Maximum productivity die-cutting: 7500 sheets/hour
PILE HEIGHT
Maximum height feeder(normal mode): 1820 mm
Maximum height feeder(with pile preparation device): 1710 mm
Maximum height Feeder(non-stop): 1660 mm
Maximum height Feeder(with pile preparation device non-stop): 1550 mm
Maximum height Delivery: 1460 mm
Gripper margin: 9 – 17 mm
Height of embossing dies: 6,35 / 7 mm
Height of cutting rules: 23,8 mm
PLATEN TEMPERATURE
Adjustable temperature: 50 – 160 °C
16 x adjustable temperature zones
FOIL SUPPLY MODULE
Maximum reel diameter: 250 mm
Foil web width: 25- 1010 mm
3 x advance shafts
Maximum programmable advance: 720 mm
Machine location
Open on Google Maps-
Address: Șoseaua Nicolina 43
-
City: Iasi
-
Country: Romania
